<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title>磨具磨料</title>
<link>http://www.pfresin.com/industry/abrasives/</link>
<description>应用中心 / 磨具磨料</description>
<language>zh-cn</language>
<generator><![CDATA[Copyright &amp;copy; 2008-2010 Pfresin 版权所有]]></generator>
<webmaster>pfresin@163.com</webmaster>
<item>
    <title><![CDATA[聚酰亚胺树脂金刚石砂轮的特点和应用]]></title>
    <link>http://www.pfresin.com/article/2009/1022/446.html</link>
    <description><![CDATA[0 引言 目前国内树脂超硬磨具所用结合荆主要酚醛树脂。使用当中存在以下问题： ( l ）耐热性能差，使部分金刚石未充分发挥作用而过早脱落，表现为砂轮不耐磨； ( 2 ）干磨中常出现]]></description>
    <pubDate>2009-10-22</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[当代涂附磨具的发展和贝克莱特酚醛树脂介绍]]></title>
    <link>http://www.pfresin.com/article/2009/1022/444.html</link>
    <description><![CDATA[来源:郑州博盟磨料磨具技术信息咨询有限公司 关键字：当代涂附磨具的发展和贝克莱特酚醛树脂介绍 1 涂附磨具发展概况 自上个世纪九十年代以后，涂附磨具的国际市场已趋于稳定，]]></description>
    <pubDate>2009-10-22</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[939P树脂使用手册(英文)]]></title>
    <link>http://www.pfresin.com/article/2009/0802/409.html</link>
    <description><![CDATA[General description DIALOK 939P is a specially formulated phenol-aralkyl resin which has proven to be an outstanding high temperature, thermally stable binder for diamond and CBN grinding wheels. DIALOK 939Pgives a much higher heat resistan]]></description>
    <pubDate>2009-08-02</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[氢氧化钠溶液中氢氧化镁的水热改性]]></title>
    <link>http://www.pfresin.com/article/2009/0802/408.html</link>
    <description><![CDATA[摘要：考察了团聚态氢氧化镁在氢氧化钠溶液中的水热改性行为，分析了氢氧化钠浓度与水热产物形貌、结构与分散性的关系. 水热改性后氢氧化镁晶体的生长方向发生变化，特征衍射]]></description>
    <pubDate>2009-08-02</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[金刚石喷雾研磨剂在纸介质抛光中的应用]]></title>
    <link>http://www.pfresin.com/article/2009/0802/407.html</link>
    <description><![CDATA[摘要：金刚石喷雾研磨剂在以金丝绒、丝绸、帆布等为介质抛光金相试样时效果很好，得到了广泛的应用，但在以纸为介质抛光硬质合金时却因纸的消耗过大而无法使用。本文通过实验]]></description>
    <pubDate>2009-08-02</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[两种树脂金刚石砂轮耐磨性能与耐热性研究]]></title>
    <link>http://www.pfresin.com/article/2009/0801/406.html</link>
    <description><![CDATA[摘要： 本文通过磨削实验对比了酚醛树脂和聚酰亚胺树脂砂轮的耐磨性，通过TG-DSC差热分析比较了二者的耐热性，得出聚酰亚胺树脂的耐热性强是其比酚醛树脂砂轮更耐磨的主要原因的]]></description>
    <pubDate>2009-08-01</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[聚酰亚胺低温硬化工艺]]></title>
    <link>http://www.pfresin.com/article/2009/0801/405.html</link>
    <description><![CDATA[室温80℃自由升温。80℃--180℃之间每增加20℃，保温1小时，即120℃，140℃，160℃，180℃各保温1小时，自由升温到200℃，在200℃根据砂轮大小进行保温，如外径小于100mm，保温8小时，如外]]></description>
    <pubDate>2009-08-01</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[超细增韧聚酰亚胺树脂与耐热酚醛树脂热压成型]]></title>
    <link>http://www.pfresin.com/article/2009/0727/404.html</link>
    <description><![CDATA[一．热压规程 1、热压压力 由于结合剂中的树脂结合剂在温度作用下处于熔融态,流动性好,易于充满模腔各部位,因此热压压力不高,一般在30~60MPa。应当指出，由于成型压力的一部分消耗]]></description>
    <pubDate>2009-07-27</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[镀铜金刚石树脂砂轮的研究]]></title>
    <link>http://www.pfresin.com/article/2009/0727/403.html</link>
    <description><![CDATA[摘要 ：通过选择合适的化学镀铜工艺在金刚石表面镀覆一层金属铜。该方法可以调节镀层厚度，可一次也可以多次镀。通过XRD、SEM、EPMA等分析手段对镀铜金刚石进行了分析，结果表明]]></description>
    <pubDate>2009-07-27</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[英国939P酚醛树脂粉使用手册(中文)]]></title>
    <link>http://www.pfresin.com/article/2009/0722/402.html</link>
    <description><![CDATA[总述 DIALOK 939P是具有特殊结构的芳烷基酚醛树脂，被证实是一种显著高温，热稳定的金刚石、CBN砂轮结合剂。 DIALOK 939P 比一直用同样方法制作的一般酚醛树脂具有高得多的抗热性。 应用]]></description>
    <pubDate>2009-07-22</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[酚醛树脂应用于研磨]]></title>
    <link>http://www.pfresin.com/article/2009/0718/401.html</link>
    <description><![CDATA[一、研磨材料与磨具 按材料概念制品概念，研磨材料一类混合物料，它制造各种磨具(制品)原材料。据酚醛树脂网( www.pfresin.com)专家介绍磨具用于磨削、研磨抛光工具，大部分磨具用天]]></description>
    <pubDate>2009-07-18</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[酚醛树脂在磨具磨料方面的应用情况（一）]]></title>
    <link>http://www.pfresin.com/article/2009/0621/376.html</link>
    <description><![CDATA[酚醛树脂砂轮制作的一般工艺流程如下： 酚醛树脂结合剂砂轮的生产工艺主要有冷压工艺、半热压工艺和热压工艺三种。 砂轮冷压工艺使用的结合剂有润湿剂和粉状树脂，通常用作润]]></description>
    <pubDate>2009-06-21</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[树脂砂轮硬化工艺与酚醛树脂液使用妙招]]></title>
    <link>http://www.pfresin.com/article/2009/0320/254.html</link>
    <description><![CDATA[酚醛树脂作为砂轮的结合剂在硬化过程中对于硬化温度和硬化时间的选择，常存在一些令人头痛的问题，对于此问题，我们提请用户在选择使用树脂液时要特别注意树脂液的粘度、固体]]></description>
    <pubDate>2009-03-20</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[酚醛树脂应用之磨具磨料篇]]></title>
    <link>http://www.pfresin.com/article/2009/0312/148.html</link>
    <description><![CDATA[一、研磨材料与磨具 按材料概念和制品概念，研磨材料是一类混合物料，它是制造各种磨具(制品)的原材料。磨具是用于磨削、研磨和抛光的工具，大部分的磨具是用天然矿物磨料加上]]></description>
    <pubDate>2009-03-12</pubDate>
    <category>磨具磨料</category>
    <author>pfresin</author>
    <comments>酚醛树脂网</comments>
</item>
<item>
    <title><![CDATA[固结磨具用酚醛树脂技术要求]]></title>
    <link>http://www.pfresin.com/article/2009/0312/93.html</link>
    <description><![CDATA[牌号 技术要求 外观 游离酚% 软化点℃ 含水量% 粘度25℃秒 固含量% 细度% 乌洛托品含量% PF2123Q 浅黄色块 ≤4.5 98-110(夏季)95-110(其他) ≤1.5 PF2123F68 白色或淡黄色粉末 同上 同上 ≤1.5 99%通]]></description>
    <pubDate>2009-03-12</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>酚醛树脂网</comments>
</item>
<item>
    <title><![CDATA[线型BPA酚醛固化EP]]></title>
    <link>http://www.pfresin.com/article/2009/0306/44.html</link>
    <description><![CDATA[线型BPA酚醛固化EP前景好线型双酚A酚醛树脂用作固化剂，可以提高环氧树脂的耐热性，从而满足环氧敷铜板高性能化的要求，因此它是一种很有应用 前景的环氧树脂固化剂，受到业内广]]></description>
    <pubDate>2009-03-06</pubDate>
    <category>磨具磨料</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[酚醛树脂模塑料]]></title>
    <link>http://www.pfresin.com/article/2009/0304/37.html</link>
    <description><![CDATA[热固化性塑料： 一、石炭树脂成形材料 二、干式不饱和聚酯成形材料 三、已二酸肽脂（零本二甲酸已二烯酯）树脂成形材料 产品特性： 加工温度在200℃以上，耐高温（不溶化，不变形]]></description>
    <pubDate>2009-03-04</pubDate>
    <category>磨具磨料</category>
    <author>pfresin</author>
    <comments>酚醛树脂网</comments>
</item>
<item>
    <title><![CDATA[日本利用回收的热固性塑料制造酚醛树脂]]></title>
    <link>http://www.pfresin.com/article/2009/0304/35.html</link>
    <description><![CDATA[热固性塑料加热不熔融，不可能重新作用材料，也很难用热分解法油化，而每年报废的家用电器、计算计和汽车中大量酚醛树脂和聚氨酯等热固性塑料必须处理回收。 日本一些研究机构]]></description>
    <pubDate>2009-03-04</pubDate>
    <category>磨具磨料</category>
    <author>pfresin</author>
    <comments>酚醛树脂网</comments>
</item>
<item>
    <title><![CDATA[微球状热固性酚醛树脂]]></title>
    <link>http://www.pfresin.com/article/2009/0304/34.html</link>
    <description><![CDATA[微球状热固性酚醛树脂采用悬浮缩聚新工艺制得，因此又称为悬浮法酚醛树脂，简称为PFS树脂。与常规酚醛树脂生产工艺相比较，悬浮缩聚工艺具有以下优点：用水为悬浮介质，散热容]]></description>
    <pubDate>2009-03-04</pubDate>
    <category>磨具磨料</category>
    <author>pfresin</author>
    <comments>酚醛树脂网</comments>
</item>
<item>
    <title><![CDATA[改性酚醛树脂种类化学特性及行业应用范围]]></title>
    <link>http://www.pfresin.com/article/2009/0304/32.html</link>
    <description><![CDATA[酚醛树脂改性的目的主要是改进它脆性或其它物理性能，提高它对纤维增强材料的粘结性能并改善复合材料的成型工艺条件等。改性一般通过下列途径： ①封锁酚羟基。酚醛树脂的酚羟]]></description>
    <pubDate>2009-03-04</pubDate>
    <category>磨具磨料</category>
    <author>pfresin</author>
    <comments>酚醛树脂网</comments>
</item>

</channel>
</rss>

